SWL 2m RECEIVER


* 6GGS.....4S6GGS....***.Host By.......Gayan sameera..Srilanka...****Temp 26.5c..........*** ***...CQ....CQ....CQ...4S6GGS...4S *
SWL 2m RECEIVER

Her I am use TA2003 IC in this SWL 2m Receiver    

TA2003 DESCRIPTION

The UTC TA2003 is AM/FM Radio IC ( FM F/E +AM/FM IF ) which is designed for AM/FM Radios.

FEATURES

* FM IFT, AM IFT and FM Detector Coil aren’t needed.
* Operating Supply Voltage Range VCC ( opr ) = 1.8 ~ 7V ( Ta=25°C).  

                                                                     This experiment was done when I was a SWL lesson 145.625MHz Repeater  . This circuit was based on a FM radio originally made for receiving FM broadcast stations. I modified its RF coil & local OSC coil & removed BPF at the front end & replaced. And Also AM section was disabled in the receiver. 





       DOWNLAD 

5 comments:

  1. please re-upload the PCB design Sir, can't download from that link, Thanks...

    ReplyDelete
  2. Thanks... I can download that file now, before made it, I want to ask something, If I want to connect with frequency counter can I connect it with pin 15 ? And If I want to receive lower frequency (70-80MHz) which part should I change? Best Regard from Indonesia

    ReplyDelete
  3. yes you can conect pin15.but u want bufer amp

    ReplyDelete
  4. hello sir... please re-upload the PCB design& circuit diagram i can't download from that link, Thanks ..dani

    ReplyDelete